Access/Formwork Design

Modular, Corrugated, Interlocking Forming Pan for permanent, cost effective applications

• No time consuming "Peel Off" operation required
• Available in 4', 6', 8' and 10' long modular sections.
• Can be custom formed to fit concave or convex applications.
• Rugged steel finish can be galvanized treated or painted.
• Ridge and grove design withstands greater loads than standard pans.
• Ridge and grove design interlocks - panel on panel to desired lengths.
• Crimped radius design allows for greater concrete holding ability

The CORR-PAN is ideally suitable for forming concrete joists, stair soffits, dome forms, chamfered tunnels and more.

• The CORR-PAN is available in galvanized steel or can be pained to suit environment. The System offers a cost effective, labor saving, non-removable method of concrete forming which increases the speed of construction.
• The light weight, ridge and groove design reduces workmen fatigue. When interlocked (pan-to-pan), the system eliminates concrete spillage as in conventional or damaged pans.
• The crumpled radius of the CORR-PAN serves to enhance structural strength, integrity and adherence of concrete to the pan surface - composite beam design.

Traditional methods require concrete slabs in a 40 to 50 story building to be a miimum of 4" thick so as to comply with fire insurance standards and building codes.

• The permanently placed CORR-PAN system can reduce the slab thickness and concrete usage by up to 26 pounds per square foot.
• The CORR-PAN system increases the fire rating by up to 1.5 hours.
• The reduced consumption of concrete reduces column, beam, joist, and footing size requirements, resulting in greater materials and cost savings.

• 14 gauge construction for rugged dependable reuse applications.
• Radus End Caps design makes stripping operation 50% faster.
• 1½" radius End Caps designed to match the slope of pan sides.
• Can be easily welsed to pans to form a One Piece Dome or Long Dome

• Long-Forms and Flange Forms are designed for support of poured-in-place suspended concrete construction.
• Available in variable widths (20" - 66") and lengths, with Angle Stiffeners, 1½" radius and 3" wide Nail Flanges
• Lone-Form "C" clamps supplied with all Long-Form Pans.

• High strength design with Air Vent simplifies stripping operation.
• One-Piece Domes save Materials and labor - requires minimum finishing.
• Available in any width, height and length. All corners are built with 1½" radius.

• Vesatile design for fast, dependable set-up.
• Economical - modular sections (4' - 10' lengths).
• Rugged construction saves easy money use after use.
• Compact design - easy maneuverability & transportation.
• Reduces Timber waste - no 2x4 "knee" braces required.